configure access-list delete

configure access-list delete ruleName [ any | vlan vlan_name | ports port_list | all] {ingress | egress}

Description

Removes a dynamic ACL rule from the specified interface.

Syntax Description

ruleName Specifies a dynamic ACL rule name.
any Deletes this ACL as the wildcard ACL.
vlan_name Specifies the VLAN on which this ACL is deleted.
port_list Specifies the ports on which this ACL is deleted.
all Deletes this ACL from all interfaces.
ingress Deletes the ACL for packets entering the switch on this interface.
egress Deletes the ACL for packets leaving the switch from this interface (Summit X440-G2, X450-G2, X460-G2, X620, X670-G2, and X770 series switches only).

Default

The default direction is ingress.

Usage Guidelines

Specifying the keyword all removes the ACL from all interfaces it is used on.

Example

The following command removes the dynamic ACL icmp-echo from the port 1:2:

configure access-list delete icmp-echo ports 1:2

History

This command was first available in ExtremeXOS 11.3.

Platform Availability

This command is available on all platforms.