configure netlogin ports no-restart

configure netlogin ports [all | port_list] no-restart


Disables the network login port restart feature.

Syntax Description

all Specifies all network login ports.
port_list Specifies one or more network login ports.


The default setting is no-restart; the network login port restart feature is disabled.

Usage Guidelines

Use this command to disable the network login port restart feature on a network login port.

Configure network login port restart on ports with directly attached supplicants. If you use a hub to connect multiple supplicants, only the last unauthenticated supplicant causes the port to restart.

Displaying the Port Restart Configuration

To display the network login settings on the port, including the configuration for port restart, use the following command:

show netlogin port port_list

Output from this command includes the enable/disable state for network login port restart.


The following command disables network login port restart on port 1:1:

configure netlogin ports 1:1 no-restart


This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available on all platforms.