configure netlogin ports

configure netlogin ports [all | port_list] [allowed-users allowed_users | authentication mode [optional | required] | trap [all-traps | no-traps | [{success} {failed} {terminated} {max-reached}]]]


Use this command to set the NetLogin trap setting for system, module, and ports.

Syntax Description

all Configure all ports in the system.
port_list List of ports to configure.
allowed-users Number of users allowed per port.
allowed_users Number of users allowed per port. Range 0-65535.
authentication Configure port authentication settings.
mode Port authentication mode.
optional Authentication optional.
required Authentication required.
all-traps Enable sending all trap types.
no-traps Disable sending all trap types.
success Enable sending success trap.
failes Enable sending failed trap.
terminated Enable sending terminated trap.
max-reached Enable sending max number users reached trap



Usage Guidelines



This example shows how to enable all NetLogin port trap setting:

configure netlogin trap port 1:1 all


This command was first available in ExtremeXOS 16.1.

Platform Availability

This command is available on the Summit X450-G2, X460-G2, X670-G2, and X770.