configure ntp vr

configure ntp vr vr-name


Use this command to change the virtual router on which NTP is configured (that is, enabled).

Syntax Description

vr-name Name of the virtual router.


NTP is configured on VR-Default by default.

Usage Guidelines

NTP can be enabled on only one virtual router at once.

You must disable NTP globally before configuring NTP on another virtual router.


The following example configures NTP on the virtual router "vr-acme":

configure ntp vr vr-acme


This command was first available in ExtremeXOS 15.7.

Platform Availability

This command is available on all platforms.