New topicconfigure virtual-network remote-endpoint vxlan ipaddress monitor

configure virtual-network remote-endpoint vxlan ipaddress ipaddress { vr vr_name } monitor [ on | off ]

Description

This command enables or disables statistics monitoring (byte/packet counters) on a Virtual Network remote endpoint.

Syntax Description

ipaddress An existing interface IPv4 address.
vr VR/VRF instance the IPv4 address is configured on.
vr_name An existing VR/VRF name.
on Enable statistics.
off Disable statistics.

Default

VR-Default.

Usage Guidelines

N/A.

Example

To enable statistics monitoring on an existing Virtual Network remote endpoint:

configure virtual-network remote-endpoint vxlan ipaddress 10.10.10.146 monitor on
To disable statistics monitoring on an existing Virtual Network remote endpoint:
configure virtual-network remote-endpoint vxlan ipaddress 10.10.10.146 monitor on

History

This command was first available in ExtremeXOS 21.1.

Platform Availability

This command is supported on the Summit X770, X670-G2 standalone, and stacks with X770 and X670-G2 slots only.