New topicconfigure vrrp fabric-route-mode

configure vrrp {vlan vlan_name vr vr_id | all} fabric-routing [on | off]

Description

This command enables fabric routing mode on the VRRP router. This setting can be done on all VRRP routers, but it will not affect the VRRP master router. It will take effect in VRRP Backup router. With respect to VRRP state, backup state will be used for CLI and MIB, so that standard MIB can be used for retrieving the states.

Syntax Description

vlan_name VLAN name.
vr_id Virtual router ID value.
all Configuration affects all VRRP VRs.
on Enable L3 forwarding capability for a VRRP router in backup state.
off Disable L3 forwarding capability for a VRRP router in backup state (default).

Default

Off.

Usage Guidelines

None.

History

This command was first available in ExtremeXOS 21.1.

Platform Availability

This command is supported on all platforms.