New topiccreate virtual-network remote-endpoint vxlan ipaddress

create virtual-network remote-endpoint vxlan ipaddress ipaddress {vr vr_name}

Description

This command creates a remote endpoint.

Syntax Description

ipaddress A remote endpoint IP address.
vr VR/VRF instance the remote endpoint is associated with
vr_name An existing VR/VRF name.

Default

VR-Default

Usage Guidelines

This command is useful when you want to explicitly add a remote endpoint in addition to the ones learnt dynamically (OSPF extensions). In flood mode explicit, you must create a remote-endpoint using this command, if the configurations on remote-endpoint (like monitor) need to be saved to the configuration. Otherwise, the configuration will be lost after the switch reboots.

Example

To create a remote endpoint:

create virtual-network vxlan remote-endpoint ipaddress 1.2.3.4

History

This command was first available in ExtremeXOS 21.1.

Platform Availability

This command is supported on the Summit X770, X670-G2 standalone, and stacks with X770 and X670-G2 slots only.