enable dot1p examination inner-tag port

enable dot1p examination inner-tag port [all | port_list]

Description

Used with VMANs, and instructs the switch to examine the 802.1p value of the inner tag, or header of the original packet, to determine the correct egress queue on the egress port.

Syntax Description

all Specifies all ports.
port_list Specifies a list of ports or slots and ports.

Default

Disabled.

Usage Guidelines

Use this command to instruct the system to refer to the 802.1p value contained in the inner, or original, tag when assigning the packet to an egress queue at the egress port of the VMAN.

Note

Note

See Quality of Service in the ExtremeXOS User Guide for information on configuring and displaying the current 802.1p and DiffServ configuration for the inner, or original header, 802.1p value.

Example

The following example puts the packets in the egress queue of the VMAN egress port according to the 802.1p value on the inner tag:

enable dot1p examination inner-tag port 3:2

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on all platforms.