enable mpls protocol rsvp-te

enable mpls protocol rsvp-te


Enables RSVP-TE for the switch.

Syntax Description

This command has no arguments or variables.



Usage Guidelines

When RSVP-TE is enabled, configured LSPs begin the process of TE LSP establishment and VLAN interfaces that have RSVP-TE enabled begin processing RSVP path/reserve messages. By default, RSVP-TE is disabled. While RSVP-TE is transitioning to the enabled state, only the MPLS show commands are accepted.


The following command globally enables RSVP-TE on the switch:

enable mpls protocol rsvp-te


This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available only on the platforms that support MPLS as described in the Feature License Requirements document.