enable mpls rsvp-te

enable mpls rsvp-te [{vlan} vlan_name | vlan all]


Enables RSVP-TE for the specified MPLS-configured VLAN.

Syntax Description

vlan Specifies that RSVP-TE is to be enabled on one or more VLANs.
vlan_name Identifies a specific VLAN on which RSVP-TE is to be enabled.
vlan all Enables RSVP-TE on all VLANS that have been added to MPLS.



Usage Guidelines

When RSVP-TE is enabled, TE LSP establishment for configured LSPs begins and the processing of RSVP path/reserve messages from peer LSRs is permitted. By default, RSVP-TE is disabled for all MPLS-configured VLANs. Specifying the optional all keyword enables RSVP-TE for all VLANs that have been added to MPLS.


The following command enables RSVP-TE on the specified VLAN:

enable mpls rsvp-te vlan vlan_1


This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available only on the platforms that support MPLS as described in the Feature License Requirements document.