enable network-clock sync-e

enable network-clock sync-e port [port_list | all]

Description

Enables synchronous Ethernet (SyncE) on port(s).

Syntax Description

port_list

Specifies a port or group of ports.

all

Specifies all ports.

Default

Disabled.

Usage Guidelines

Use this command to enable SyncE on one or more ports.

If you attempt to enable SyncE on a port or ports that are not supported, one of the following messages is displayed:

ERROR: Cannot enable Synchronous Ethernet on ports
ERROR: Cannot enable Synchronous Ethernet on some/all ports

To disable SyncE, use the disable network-clock sync-e command.

To display SyncE settings, use the show network-clock sync-e ports command.

Example

The following command enables SyncE on port 2:

enable network-clock sync-e port 2

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on all platforms.