show inline-power configuration ports

show inline-power configuration ports port_list


Displays inline power configuration information for the specified ports.

Syntax Description

port_list Specifies one or more ports.



Usage Guidelines

The output displays the following inline power configuration information for the specified ports:
  • Config—Indicates whether the port is enabled to provide inline power:
    • Enabled: The port can provide inline power.

    • Disabled: The port cannot provide inline power.

  • Operator Limit—Displays the configured limit, in milliwatts, for inline power on the port.

  • Label—Displays a text string, if any, associated with the port.

The following also displays for this command on modular PoE devices:
  • Priority—Displays inline power priority of the port, which is used when the disconnect precedence is set to lowest priority:
    • Low.

    • High.

    • Critical.


The following command displays inline power configuration information for ports 1 to 10 in slot 3 on a modular switch:

show inline-power configuration port 3:1-10

Following is sample output from this command:

Port   Config   Operator Limit   Priority   Label
3:1    Enabled     15000 mW      Low
3:2    Enabled     15000 mW      Low
3:3    Enabled     15000 mW      Low
3:4    Enabled     15000 mW      Low
3:5    Enabled     15000 mW      Low
3:6    Enabled     15000 mW      Low
3:7    Enabled     15000 mW      Low
3:8    Enabled     15000 mW      Low
3:9    Enabled     15000 mW      Low
3:10   Enabled     15000 mW      Low


This command was first available in ExtremeXOS 11.1

Platform Availability

This command is available on the PoE devices listed in Extreme Networks PoE Devices.