show ipconfig ipv6

show ipconfig ipv6 {vlan vlan_name | tunnel tunnel_name}

Description

Displays configuration information for one or more interfaces in the current VR context.

Syntax Description

vlan_name Specifies an IPv6 configured VLAN.
tunnel_name Specifies an IPv6 tunnel.

Default

N/A.

Usage Guidelines

If no interface is specified, then global IPv6 configuration is displayed. Otherwise, specific interface(s) will be displayed. Global IPv6 configuration information includes:
  • IPv6 address/netmask/etc.
  • IPv6 forwarding information/IPv6 multicast forwarding information

Example

The following example displays configuration information on a VLAN "accounting":

show ipconfig ipv6 vlan accounting

The current and configured values for max-gateways now apply to IPv6 gateway sets as well as IPv4, so these values are added to the output:.

# show ipconfig ipv6  
Route Sharing : Disabled    
ICMP Redirect for Fast Path : Disabled    
Max Shared Gateways : Current: 32 Configured: 32

History

This command was first available in ExtremeXOS 11.2.

This command changed to display information for the current VR context in ExtremeXOS 12.5.

The show output for max-gateways was added in ExtremeXOS 15.3.

Platform Availability

This command is available on the platforms listed for the IPv6 unicast routing feature in the Feature License Requirements document.