show network-clock ptp boundary unicast-master

show network-clock ptp [boundary | ordinary] unicast-master [{vlan} vlan_name | vlan all]

Description

Show the unicast master table of the specified clock port or all clock ports. This command is available only for boundary and ordinary clocks.

Syntax Description

boundary Specifies the boundary clock.
ordinary Specifies the ordinary clock.
unicast-master Specifies table of unicast masters.
vlan VLAN.
vlan_name VLAN name.
vlan all Specifies all vlans.

Default

N/A.

Usage Guidelines

Use this command to display the unicast master table of the specified clock port or all clock ports. This command is available only for boundary and ordinary clocks.

Example

The following command displays the unicast master table for all clock ports:

E4G-200.1 # show network-clock ptp boundary unicast-master vlan all
VLAN Name                         IP Address       Log Query
gm1-lpbk                          1.1.1.101                3
ptp-s1                            22.55.0.2                3

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on the Summit X670-G2, X460-G2, and X770.

Note

Note

PTP commands can be used only with the Network Timing feature pack.