show policy profile

show policy profile {all | profile_index} {detail}


Use this command to display policy profile information.

Syntax Description

profile Show current policy profile.
all All profile entries.
profile_index Profile index.
detail Displays all information in detail.


If optional parameters are not specified, summary information will be displayed for the specified index or all indexes.


This example shows how to display policy information for policy profile 11:

show policy profile 11
Profile Index           :11
Profile Name            :
Row Status              :active
Port VID Status         :disabled
Port VID Override       :1
CoS Status              :enabled
CoS                     :7
Syslog on use           :disabled
Trap on use             :disabled
Disable ingress port    :disabled
Replace TCI Status      :enabled
Tagged Egress           :
Untagged Egress         :
Rule Precedence         :1-2,10,12-18,20-22,25,31
                        :MACSource (1), MACDest (2), IPv6Dest (10), 
                        :IPSource (12), IPDest (13), IPFrag (14), 
                        :UDPSrcPort (15), UDPDestPort (16), TCPSrcPort (17), 
                        :TCPDestPort (18), TTL (20), IPTOS (21), IPProto (22), 
                        :Ether (25), Port (31)
Admin Profile Usage     :6
Oper Profile Usage      :6
Dynamic Profile Usage   :none


This command was first available in ExtremeXOS 16.1.

Platform Availability

This command is available on all platforms.