show version

show version {detail | process name | images {partition partition} {slot slotid} }

Description

Displays the hardware serial and version numbers, the software version currently running on the switch, and (if applicable) the software version running on the modules and power controllers.

Syntax Description

detail Specifies display of slot board name and chassis or platform name.
process Specifies display of all of the processes on the switch.
name Specifies display of a specific process on the switch.
images Specifies the display of installed images.
partition Specifies display of a specific partition (primary or secondary).
slotid
Specifies display of an MSM/MM in a specific slot (A or B).
Note: This parameter is available only on modular switches.

Default

N/A.

Usage Guidelines

The following describes the information displayed when you execute the show version or show version detail commands:
  • Part Number—A collection of numbers and letters that make up the part number of the switch and when applicable the hardware components installed in a modular switch.

  • Serial Number—A collection of numbers and letters that make up the serial number of the switch and when applicable the hardware components installed in a modular switch.
    Note

    Note

    For information about the physical location of the serial number on your switch, refer to the section that describes your specific switch model in the hardware documentation.
  • Image—The ExtremeXOS software version currently running on the switch. If you have two software images downloaded on the switch, only the currently running ExtremeXOS version information is displayed. The information displayed includes the major version number, minor version number, a specific patch release, and the build number. The software build date is also displayed.

  • BootROM—The BootROM version currently running on the switch.

  • FPGA—The field-programmable gate array firmware version currently running on the switch (Summit X440-G2 and X620 only).

  • PLD—The programmable logic device firmware version currently running on the switch (Summit X440-G2 and X620 only).

Depending on the model of your switch and the software running on your switch, different version information may be displayed.

If you use the process option, you will see the following information about the processes running on the switch:
  • Card—The location (MSM/MM) where the process is running on a modular switch.

  • Process Name—The name of the process.

  • Version—The version number of the process.

  • BuiltBy—The name of the software build manager.

  • Link Date—The date the executable was linked.

Example

The following command displays the hardware and software versions currently running on the switch:

show version
X440G2-24x-10G4.2 # show ver d
Switch      : 800621-00-01 1515G-00131 Rev 1.0 BootROM: 1.0.1.7    IMG: 21.1.0.19
              FPGA: 1.1.42.0 PLD1: 1.0.10.0 PLD2: 1.0.10.0 PLD3: 1.0.10.0 PLD4: 1.0.10.0
PSU-1       : Internal Power Supply
PSU-2       : 

Image   : ExtremeXOS version 21.1.0.19 21.1
          on Wed Dec 2 14:45:14 EST 2015
BootROM : 1.0.1.7Diagnostics : 5.1
Switch        PCB Info: EVTFC24X1A1G
Subsystem     PCB Info: EVTFC24X1A1G  

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on all platforms.