Search

Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

Creating a Backup Configuration File

Before upgrading ExtremeXOS on a switch, it is highly recommended that you create a backup copy of the configuration. Creating a copy of the "Config Booted" configuration file, with the version number of the ExtremeXOS image included in the name of the backup copy, is the simplest method.

To do this:

  1. Save the configuration to the database so the switch can reapply the configuration after the switch reboot using the save command.
  2. Enter y at the prompt to save your changes.
  3. Execute the show switch command to view the "Config Booted" file. The following output is displayed: 
    # show switch
SysName:          XXXXX
SysLocation:
SysContact:       support@extremenetworks.com, +1 888 257 3000
System MAC:       00:04:96:51:FE:E2
System Type:      XXXXXX

SysHealth check:  Enabled (Normal)
Recovery Mode:    All
System Watchdog:  Enabled 

Current Time:     Thu Sep  4 00:57:18 2014
Timezone:         [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC.
Boot Time:        Wed Sep  3 20:07:11 2014
Boot Count:       402
Next Reboot:      None scheduled
System UpTime:    4 hours 50 minutes 7 seconds 

Current State:    OPERATIONAL
Image Selected:   primary
Image Booted:     primary
Primary ver:      15.7.1.4
Secondary ver:    15.7.1.5 

Config Selected:  ssh-privatekey.cfg
Config Booted:    ssh-privatekey.cfg 
                  ssh-privatekey.cfg Created by ExtremeXOS version 15.7.1.5                  
            219131 bytes saved on Mon Jul 14 23:03:08 2014
  4. Using the ExtremeXOS version shown in the "Config Booted:" line, enter the "copy" command as shown:
    cp config selected config-booted-exos_ver

    For example: cp ssh-privatekey.cfg ssh-privatekey-15_7_1_5

    Note

    Note

    For more information about version strings, see Understanding the Image Version String.

For more information about ExtremeXOS configuration files, see Configuration Changes.

In addition, NetSight and Ridgeline products have documented methods for backing up and restoring configuration for Extreme devices.

For NetSight procedures, visit https://extranet.extremenetworks.com/ (a valid customer account is required access this site) or access the online help available from the Help menu in the NetSight application.

For Ridgeline procedures, see the Configuration Manager section of the Ridgeline Reference Guide.

Email this topicEmail this topic

Print this pagePrint this page