Example 2

Click to expand in new window
../Graphics/igmp_example2.png
  1. Navigate to Configuration > IPMC > Basic Configuration,
  2. Select the Snooping Enabled check box.
  3. Clear the Unregistered IPMCv4 Flooding Enabled check box.
  4. If Multicast stream is from L3 switch, then the uplink port must be “Router Port.”
    Note

    Note

    If an aggregation member port is selected as a router port, the whole aggregation will act as a router port.
    Click to expand in new window
    ../Graphics/hw_guide_igmp_app_guide_ex2_step1-3.png
  5. Go to Configuration > IPMC > VLAN Configuration.
  6. Select the Snooping Enabled check box.
    Click to expand in new window
    ../Graphics/hw_guide_igmp_app_guide_ex2_step5.png
  7. Set VLAN (Virtual LAN) ID of port14.