Configuring RADIUS Server

  1. Prepare a Linux PC with RADIUS (Remote Authentication Dial In User Service) server installed.
  2. Edit secret key for RADIUS server using the following settings
    client {
    .......secret = a1b2c3d4



    The secret in the ISW should be the same as this one.
  3. Edit user name and password for supplicant to authenticate with server with the following settings:
    test123.......Cleartext-Password := “test123”
    aaaa.......Cleartext-Password := “aaaa”
  4. Set a static IP address for this RADIUS Server:
  5. Start the RADIUS server.