Configuring Ringv2 (Web UI)

This section introduces the Industrial Switch Series Software Spec for Ringv3.

In the current design, one device supports a three-ring index, including Ring & Chain (single ring, dual ring, coupling, dual-homing, chain, and balancing-chain.)

Click to expand in new window
../Graphics/config_ringv2.png
Note

Note

  1. Enable group1 before configure group2 as coupling.
  2. When group1 or group2 is enabled, the configuration of group3 is invisible.
  3. When group3 is enabled, the configuration of group1 and group3 is invisible.
  1. Disable RSTP on all ring ports by navigating to Configuration > Spanning Tree > CIST ports.
  2. Clear STP Enabled on the desired ring ports.
  3. Click Save.
Click to expand in new window
../Graphics/hw_guide_config_ringv2_step1.png