Connecting & Logging in to the Switch

  1. Connect to ISW Ethernet port (RJ45 Ethernet port) using factory default IP:
  2. Log in with default account and password (admin / [none])
  3. Change the IP with commands listed below:
    configure terminal
    interface vlan 1
    ip address
  4. To log in to the web interface, enter your switch's IP address in a web browser.
    Refer to Web Browser Support to ensure your browser is supported.
  5. Enter the account name and password.
  6. Click Sign in.
For information on configuring and monitoring the switch through the web interface, see the ISW-Series Managed Industrial Ethernet Switch Web Configuration Guide.