Connecting the Ethernet Interface (RJ45 Ethernet)

ISW provides two types of electrical (RJ45) and optical (mini-GBIC) interfaces.

  • To connect to a PC, use a straight-through or a cross-over Ethernet cable.
  • To connect the ISW copper port to an Ethernet device, use UTP (Unshielded Twisted Pair) or STP (Shielded Twisted Pair) Ethernet cables.
Click to expand in new window
../Graphics/pin_assignment_resized2.jpg

The pin assignment of RJ45 connector is shown in RJ45 Connector Pins and RJ45 Connector Pin Assignment

Click to expand in new window
RJ45 Connector Pins
../Graphics/image14.wmf
Click to expand in new window

RJ45 Connector Pin Assignment

Pin Assignment PoE Assignment
1, 2 T/Rx+, T/Rx- Positive VPort
3, 6 T/Rx+, T/Rx- Negative VPort
4, 5 T/Rx+, T/Rx- X
7, 8 T/Rx+, T/Rx- X