DSCP Translation

This page allows you to configure the basic QoS (Quality of Service) DSCP Translation settings for all switches. DSCP translation can be done in Ingress or Egress.

Click to expand in new window
../Graphics/config_qos_dscp_translation.png
Object Description
DSCP Maximum number of supported DSCP values are 64 and valid DSCP values are 0 – 63.
Ingress Ingress side DSCP can be first translated to new DSCP before using the DSCP for QoS class and DPL map.

There are two configuration parameters for DSCP Translation:

  • Translate
  • Classify
Translation DSCP at Ingress side can be translated to any of (0 – 63) DSCP values.
Classify Click to enable Classification at ingress side.
Egress There are the following configurable parameters for Egress side:
  • Remap DP0: Controls the remapping for frames with DP level 0.
  • Remap DP1: Controls the remapping for frames with DP level 1.
Remap DP0 Select the DSCP value from select menu to which you want to remap. DSCP valid values are 0 – 63.
Remap DP1 Select the DSCP value from select menu to which you want to remap. DSCP valid values are 0 – 63.
Buttons
../_Common/../Graphics/save_new.png Save changes.
../_Common/../Graphics/reset_new.png Undo any changes and revert to previously saved values.