IP Subnet-based VLAN

The IP subnet-based VLAN (Virtual LAN) entries can be configured here. This page allows for adding, updating and deleting IP subnet-based VLAN entries and assigning the entries to different ports. This page shows only static entries.

Note

Note

The maximum possible IP subnet-based VLAN entries are limited to 128.
Click to expand in new window
../Graphics/config_vcl_ip_subnet_vlan.png
Object Description
Delete To delete an IP subnet-based VLAN entry, check this box and click save. The entry will be deleted in the stack.
VCE ID Indicates the index of the entry. It is user configurable and valid values are 0 – 128. If a VCE ID is 0, application will auto-generate the VCE ID for that entry. Deletion and lookup of IP subnet-based VLAN are based on VCE ID.
IP Address Indicates the IP address.
Mask Length Indicates the network mask length.
VLAN ID Indicates the VLAN ID. VLAN ID can be changed for the existing entries. Valid VLAN IDs are 1 –4095.
Port Members A row of check boxes for each port is displayed for each IP subnet-based VLAN entry. To include a port in an IP subnet-based VLAN, check the box. To remove or exclude the port from the IP subnet-based VLAN, make sure the box is unchecked. By default, no ports are members, and all boxes are unchecked.
Buttons
../_Common/../Graphics/auto_refresh.png Refresh the page automatically every three seconds.
../_Common/../Graphics/refresh.png Refresh the page immediately. Any non-committed changes will be lost.
../_Common/../Graphics/delete.png Undo the addition of the new entry or server.
../_Common/../Graphics/add_new_entry.png Add a new entry.
../_Common/../Graphics/save_new.png Save changes.
../_Common/../Graphics/reset_new.png Undo any changes and revert to previously saved values.