ARP Inspection and Port Mode Configuration

This page provides ARP Inspection related configuration.

Click to expand in new window
../Graphics/config_security_network_arp_inspection_port_mode.png
Object Description
Mode of ARP Inspection Configuration Enable the Global ARP Inspection or disable the Global ARP Inspection.
Port Mode Configuration
Specify ARP Inspection is enabled on which ports. Only when both Global Mode and Port Mode on a given port are enabled, ARP Inspection is enabled on this given port. Possible modes are:
  • Enabled: Enable ARP Inspection operation.
  • Disabled: Disable ARP Inspection operation.
If you want to inspect the VLAN (Virtual LAN) configuration, you have to enable the setting of Check VLAN. The default setting of Check VLAN is disabled. When the setting of “Check VLAN” is disabled, the log type of ARP Inspection will refer to the port setting. And the setting of “Check VLAN” is enabled, the log type of ARP Inspection will refer to the VLAN setting. Possible setting of “Check VLAN” are:
  • Enabled: Enable check VLAN operation.
  • Disabled: Disable check VLAN operation.
Only the Global Mode and Port Mode on a given port are enabled, and the setting of Check VLAN is disabled, the log type of ARP Inspection will refer to the port setting. There are four log types and possible types are:
  • None: Log nothing.
  • Deny: Log denied entries.
  • Permit: Log permitted entries.
  • ALL: Log all entries.
Buttons
../_Common/../Graphics/save_new.png Save changes.
../_Common/../Graphics/reset_new.png Undo any changes and revert to previously saved values.
../_Common/../Graphics/translate_dynamic_to_static.png Translate all dynamic entries into static entries.