===================================================================
                REVISION NOTES FOR SITE MANAGER VERSION 7.03 REVISION 1
===================================================================

Site Manager Version 7.03 Revision 1 is a post 5.00 revision. This version
is backwards compatible and supports the following BayRS (router software)
versions:

   13.03
   13.02
   13.01
   13.00
   12.03
   12.02
   12.01
   11.03
   11.02
   11.01
   11.00

Note: When running revisions of BayRS in conjunction with a fix version of Site Manager, be aware that there may be new MIB attributes that were added in a router revision that are not supported in a Site Manager revision. Refer to the Revision Notes for both Site Manager and BayRS software.

7.03 Revision 1 is Year 2000 Compliance Certified by Nortel Networks. It has successfully passed Nortel Networks Test Procedure which tests conformance to the Nortel Networks Year 2000 compliance definition, which can be found at the Nortel Networks Year 2000 Web Site at http://www.nortelnetworks.com/corporate/ year2000/.

===================================================================
7.03 Revision 1 corrects the following problems:
===================================================================
CR 105788: Kernel
    A BN router with a FRE2 060e module installed does not display the
    slot for this flash card on the Administration -> Kernel
    Configuration window.

CR 106858: DLSw
    Site Manager incorrectly allows configuration of backup peer
    parameters even though the Backup Config parameter is disabled.

CR 107046: IP
    Attempts to change the Associated Address for an IP Unnumbered
    Interface at the Protocols -> IP -> Interfaces -> Change window are
    unsuccessful.

CR 107172: IPEX
    Deleting the Connector or IPEX service record does not delete the
    corresponding IPEX mapping entries.

CR 108209: System 5000
    Configuring dual Ethernet on System 5000 causes Site Manager to
    crash when you attempt to add circuits at the Add Circuits window.

CR 109260: BGP
    Using Site Manager to delete BGP from a configuration with multiple
    circuits (including circuitless IP), causes only the Add Circuits
    option to be available on the Circuits pull-down menu.

CR 109261: Events Manager
    Site Manager running on HP/UX platform does not successfully save
    output to disk when configuring within Events Manager.

CR 109975: ATM
    When an ATM ARE circuit is created on a BN and run in Report
    Generator, the Line Mapping option shows corrupt data.

CR 110436: ATM
    An enhancement request to set the Maximum Data Frame Size
    (wflecConfigMaxDataFrameSize) parameter to 9234 and 18190 in Site
    Manager, as is currently available in the BCC.

CR 110653: WCP
    Opening a file in local mode for which WCP is configured on slots
    with a FRE2 060e, removes wfHwCompLoad from all slots when you
    attempt to save the file in Site Manager.

CR 113092: ATM
    When configuring an ATM circuit with a data encapsulation type of
    null, and a connection type of PVC, the OAM Alarm field is displayed
    twice on the Virtual Channel Link window.

CR 113488: PPP
    Connecting to an AN or ARN router when install.bat was used to
    configure a PPP circuit for Site Manager, causes PPP to unload from
    the router.

CR 114605: IPX
    When modifying an existing IPX interface, Site Manager displays the
    invalid value 3 in the RIP/SAP Immediate Update field when the
    config file is less than 13.03.

CR 114675: NBIP
    Deleting a circuit on which NBIP is configured, fails to delete the
    corresponding wfCircuitNameEntry for that circuit. This problem only
    affects circuits that have been assigned circuit numbers that are
    greater than 1 digit (i.e, 10 or greater).

CR 115219: IP
    Selecting the Details option on the IP Autoconfig window on MCT1
    causes a core dump to occur.