Worldwide Customer Service - Lifecycle Support for Adaptive Networking

Router Software version 11.03/Revision 2

=============================================================================
                       SITE MANAGER COMPATIBILITY
=============================================================================

       Router Version       is managed by          Site Manager version

        v11.03 revision 1 --------------------------> V5.03, V5.03 rev1
        v11.03 revision 2 --------------------------> V5.03, V5.03 rev1

=============================================================================
Revision 11.03/2 corrects the following problems:
=============================================================================
CR 26589: OSPF.
          When you globally reset OSPF, a bus error may occur. The error
          occurs because the OSPF primary receive gate is holding an excessive
          number of buffers while it is waiting for buffers to be allocated to
          send to the secondary gate.

CR 35021: OSPF.
          The ignore action of an OSPF accept policy does not work.

CR 72873: OSPF.
          When you modify a router ID, more than one type 2 advertisement gets
          installed in the database. When the old advertisement is aged out,
          the route is removed, but no route is installed in the routing table
          for the new type 2 advertisement.

CR 36052: OSPF.
          A problem exists in OSPF where under certain configurations, it will
          summarize a summary advertisement that is based on a stub network
          that is down. When the stub network goes down, OSPF fails to flush
          the summary generated based on the stub.

CR 35611: BGP.
          If you are running BGP on an ARE, BGP faults when you try to add a
          new route.

CR 71779: IPX.
          IPX route filters do not work if multiple filters with
          different priorities are configured on a circuit.

CR 35570: PPP.
          The PPP header size is incorrectly included in the calculation for
          determining the maximum frame size
          (wfIpxCircEntry.wfIpxCircLocalMaxPacketSize).

CR 35414: IP.
          In a multiline setup with three or more lines, if one of the lines
          goes down, the router may fail to resolve the far-end host address
          via ARP.

CR 35887: OSPF.
          When you use an OSPF Announce Policy filter to aggregate a range of
          external networks, the aggregated LSA may constantly refresh if a
          network within the range is unstable.

CR 36065: ATM.
          A VBM error occurs when the remote end of a PVC comes up with ATM
          switches that support OAM signals.

Feedback | Service Search | ERC