===========================================================================
Nortel Networks Inc. Updated: 01/17/2008
Enterprise NMS DIT Package README file for Ethernet Routing Switch 4548GT-PWR
running agent software v5.1.0 (A Version)
===========================================================================
DIT PACKAGE SUMMARY:
===========================================================================
This document contains installation instructions, supported device list
with management feature information and known limitations for Device
Integration Toolkit (DIT) package of Ethernet Routing Switch 4548GT-PWR.
This package adds support for Ethernet Routing Switch 4548GT-PWR running
version 5.1.0 software into Enterprise Network Management System(ENMS).
These DIT installation instructions are not included either in Enterprise
NMS documentation or in Ethernet Routing Switch 4548GT-PWR documentation.
Enterprise NMS 10.5.1 or later is required in order to install this DIT
package and to get management support for Ethernet Routing Switch 4548GT-PWR
running v5.1.0 agent software.
DEVICES SUPPORTED:
===========================================================================
Ethernet Routing Switch 4548GT-PWR switches
(sysObjectID: 1.3.6.1.4.1.45.3.71.2) running agent software v5.1.0.
NOTE: **** This DIT package requires NMS 10.5.1 or later ****
CHANGE HISTORY:
===========================================================================
01/17/2008 - Created initial "A" version DIT package.
INSTALLATION INSTRUCTIONS:
===========================================================================
The default install location for Enterprise NMS DIT packages is:
Unix ($OITHOME): /usr/dit
Windows 2003 (%OITHOME%): <DRIVE_LETTER>:\ENMS\DIT
All installation commands are relative to the directory containing the
extracted (un-tarred or un-zipped) DIT package. The following commands
should be executed in that directory.
Manual installation on UNIX
-----------------------------------------
1. Log into Enterprise NMS workstation as root (su command).
2. Open a shell window and prepare your user environment with one of
the following commands:
source /opt/lnms/bin/opt_cshrc (for csh and tcsh)
OR
. /opt/lnms/bin/opt_kshrc (for sh or ksh)
3. Create a temporary directory for the DIT package.
For example: mkdir /temp
4. Navigate to the directory you just created and download/copy DIT package
to this location. Uncompress and untar the package using
uncompress NMS_ERS4548GT_PWR_v510_A.tar.Z
tar -xvf NMS_ERS4548GT_PWR_v510_A.tar
5. At the command prompt, type
./install
6. You are asked if you want to backup the existing databases. Choose yes
or no.
The installation script runs and copies various files (*.gif, *.mdb,
*.dat, etc.) into the appropriate directories. Finally, the ditInstall
utility is run to add Ethernet Routing Switch 4548GT-PWR support into
Enterprise NMS.
Manual installation on Windows
-----------------------------------------------
1. On your workstation, log in as administrator
2. Download and Copy the DIT package (a self-extracting archive) into
<Drive>:\enms\DIT\temp
3. Execute the DIT package file so that all the files in the package are
extracted. The files are extracted in the directory
<Drive>:\enms\DIT\temp\NMS_ERS4548GT_PWR_v510_A
4. Open a command window.
5. Navigate to the directory that was created
( cd <Drive>:\enms\DIT\temp\NMS_ERS4548GT_PWR_v510_A )
6. At the command prompt type
install.bat
The installation script runs and copies various files (*.gif, *.mdb,
*.dat, etc.) into the appropriate directories. Finally, the ditInstall
utility is run to add Ethernet Routing Switch 4548GT-PWR switch
support into Enterprise NMS.
Automated install using DITAdmin Tool on both UNIX and Windows
-------------------------------------------------------------------
1. Run ditadmin tool (packaged with NMS), at the command prompt by
typing (on Unix and Windows)
ditadmin
2. Download the DIT package and make sure that the package is located at:
<Drive>:\enms\DIT (on Windows)
/opt/dit (on UNIX)
3. Select Tools->Install Component... menuitem.
4. In the Open dialog box, select the package and click on OK.
5. A dialog box pops up asking if you want to backup the existing
databases. Choose yes or no.
6. Another dialog box should come up showing the progress of the DIT
install. Select OK once DIT install is completed.
Installation Results:
---------------------
After successful installation an entry corresponding to Ethernet Routing
Switch 4548GT-PWR v5.1.0 will be displayed in the DITAdmin Tool main window.
MANAGEMENT FEATURES IN THIS RELEASE:
===========================================================================
-- Device/Topology discovery and visualization
-- OmniView
-- SNMP Traps and Fault correlation
-- Integration with HP OpenView and Tivoli NetView NMS platforms.
DIT PACKAGE CONTENTS:
===========================================================================
install
install.bat (Windows only)
NMS_ERS4548GT_PWR_v510_A.dit
trapreg.dlg
<gifs>
bmdaCondorX.gif
ers4500x16.gif
ers4500x24.gif
ers4524gt.gif
ers4526fx.gif
ers4526gtx.gif
ers4526gtxpwr.gif
ers4526t.gif
ers4526tpwr.gif
ers4548gt.gif
ers4548gtpwr.gif
ers4550t.gif
ers4550tpwr.gif
mtrj26fx.gif
usb_flash.gif
<mibs>
bayStack.mib
bayStackAdac.mib
bayStackArpInspection.mib
bayStackDhcpSnooping.mib
bayStackErrorMessage.mib
bayStackLacpExt.mib
bayStackMulticastFlooding.mib
bayStackRadius.mib
bayStackStats.mib
bayxlr.mib
bnlog.mib
bsee.mib
bsn.mib
draft-ietf-mpls-tc-mib-10.mib
eapol-d10.mib
ers4500_v510_info.dat
ers4500_v510_info.mdb
ianaAddressFamilyNumbers.mib
ianaIfType.mib
ieee8023-lag.mib
lldp.mib
lldpExtDot1.mib
lldpExtDot3.mib
nnmst.mib
nnrst.mib
nortelSecureNetworkAccess.mib
pibFramework.mib
pibNtnEvol.mib
rapidCity.mib
rc2k.mib
rc2kAtm.mib
rcBridge.mib
rcError.mib
rcIgmp.mib
rcIp.mib
rcIpBgp.mib
rcIpMpls.mib
rcMlt.mib
rcOpm.mib
rcPort.mib
rcPos.mib
rcRadius.mib
rcTacacs.mib
rcTls.mib
rcTraps.mib
rcVlan.mib
rfc1213.mib
rfc1513.mib
rfc2021.mib
rfc2213.mib
rfc2465-tc.mib
rfc2578.mib
rfc2579.mib
rfc2819.mib
rfc2863.mib
rfc2933.mib
rfc3289.mib
rfc3289tc.mib
rfc3411.mib
rfc3412.mib
rfc3413-notif.mib
rfc3413-tgt.mib
rfc3414.mib
rfc3415.mib
rfc3418.mib
rfc3584.mib
rfc3621.mib
rfc3635.mib
rfc3826.mib
rfc4001.mib
rfc4133.mib
rfc4188.mib
rfc4293.mib
rfc4363-p.mib
rfc4363-q.mib
s5age.mib
s5cha.mib
s5ctr.mib
s5ecm.mib
s5emt.mib
s5erl.mib
s5eth.mib
s5etr.mib
s5ifx.mib
s5reg.mib
s5roo.mib
s5sbs.mib
s5tcs.mib
supported_objects
synro.mib
tripleDesConsortium.mib
<platform>
ers.20.m
ers.20.p
ers.26.m
ers.26.p
ers.32.m
ers.32.p
ers.38.m
ers.38.p
ers.44.m
ers.44.p
ers.50.m
ers.50.p
ers.64.m
ers.64.p
ers.ico (Windows only)
SUPPORTED OPERATING SYSTEMS:
===========================================================================
HPUX 11.11
Solaris 9
Solaris 10
Windows 2003 Server
KNOWN LIMITATIONS:
===========================================================================
(1) The Embedded Web Interface launchpoint doesn't work when SSL protocol
is set because the usually HTTP protocol is changed by the HTTPS secure
protocol.
(2) Q01587817 - ERS2500 v400: Active menus in EV for copper port when GBic
port is active
The same issue appears for ERS 4500 series.
(3) Q01802400 - No info for XFP ports in DIV for ERS 4526GTX in
standalone/stack mode
(4) Q01802418 - No info for XFP ports in EV-Logical View for ERS 4526GTX in
mix stack config
(5) Q01802461 - MIB-II Interface panes don't display correctly for
ERS4526GTX
===========================================================================
(c) 2005-2008 Nortel Networks Incorporated. All rights reserved.
===========================================================================