================================================================================
Nortel Inc. Updated: 03/27/2006
NMS DIT Package README file for Secure Router 1002 series running agent software
v8.4.2 (A Version)
================================================================================
DIT PACKAGE SUMMARY:
================================================================================
This document contains installation instructions, supported device list with
management feature information and known limitations for Device Integration
Toolkit (DIT) package of Secure Router 1002 series. This package adds support
for Secure Router 1002 series running version 8.4.2 software into Optivity
Network Management System (rebranded ENMS). These DIT installation instructions
are not included either in Optivity NMS (rebranded Enterprise NMS) documentation
or in Secure Router 1002 series documentation. Optivity NMS v10.3.3 or later is
required in order to install this DIT package and to get management support for
Secure Router 1002 series running v8.4.2 agent software. This package can be
installed on top of ENMS 10.4 or later.
DEVICES SUPPORTED:
================================================================================
- Secure Router 1002 (sysObjectID : 1.3.6.1.4.1.562.73.2.2.3.2) running
agent software v8.4.2.
- Secure Router 1002E (sysObjectID : 1.3.6.1.4.1.562.73.2.2.3.4) running
agent software v8.4.2.
NOTE: **** This DIT package requires ONMS 10.3.3 / ENMS 10.4 or later ****
CHANGE HISTORY:
================================================================================
03/16/2005 - Created initial "A" version DIT package.
INSTALLATION INSTRUCTIONS:
================================================================================
The default install location for Optivity NMS (rebranded ENMS) DIT packages is:
Unix ($OITHOME): /usr/oit for ONMS
OR /usr/dit for ENMS
Windows 2000/2003 (%OITHOME%): <DRIVE_LETTER>:\Optivity\oit for ONMS
OR <DRIVE_LETTER>:\enms\dit for ENMS
All installation commands are relative to the directory containing the extracted
(un-tarred or un-zipped) DIT package. The following commands should be executed
in that directory.
Manual installation on UNIX
--------------------------------------------------------------------------------
1. Log into Optivity NMS (Enterprise NMS) workstation as root (su command).
2. Open a shell window and prepare your user environment with one of
the following commands:
source /opt/lnms/bin/opt_cshrc (for csh and tcsh)
OR
. /opt/lnms/bin/opt_kshrc (for sh or ksh)
3. Create a temporary directory for the DIT package.
For example: mkdir /temp
4. Navigate to the directory you just created and download/copy DIT package
to this location. Uncompress and untar the package using
uncompress NMS_sr1002_v842_A.tar.Z
tar -xvf NMS_sr1002_v842_A.tar
5. At the command prompt, type
./install
The installation script runs and copies various files (*.gif, *.mdb,
*.dat, etc.) into the appropriate directories. Finally, the oitInstall
(ditInstall in ENMS) utility is run to add Secure Router 1002 series
support into Optivity NMS (rebranded Enterprise NMS).
Manual installation on Windows
--------------------------------------------------------------------------------
1. On your workstation, log in as administrator
2. Download and Copy the DIT package (a self-extracting archive) into
<Drive>:\Optivity\oit (for ONMS)
OR <Drive>:\enms\dit (for ENMS)
3. Execute the DIT package file so that all the files in the package are
extracted. The files are extracted in the directory
<Drive>:\Optivity\oit\temp\NMS_sr1002_v842_A (for ONMS)
OR <Drive>:\enms\dit\temp\NMS_sr1002_v842_A (for ENMS)
4. Open a command window.
5. Navigate to the directory that was created
( <Drive>:\Optivity\oit\temp\NMS_sr1002_v842_A ) (for ONMS)
OR ( <Drive>:\enms\dit\temp\NMS_sr1002_v842_A ) (for ENMS)
6. At the command prompt type
.\install.bat
The installation script runs and copies various files (*.gif, *.mdb,
*.dat, etc.) into the appropriate directories. Finally, the oitInstall
(ditInstall in ENMS) utility is run to add Secure Router 1002 series support
into Optivity NMS (Enterprise NMS).
Automated install using OITAdmin/DITAdmin Tool on both UNIX and Windows
--------------------------------------------------------------------------------
1. Run oitadmin tool (ditadmin in ENMS) (packaged with NMS), at the command
prompt by typing (on Unix and Windows)
oitadmin (for ONMS)
OR ditadmin (for ENMS)
2. Download the DIT package and make sure that the package is located at:
<Drive>:\Optivity\oit (on Windows with ONMS)
OR <Drive>:\enms\dit (on Windows with ENMS)
OR /opt/oit (on UNIX with ONMS)
OR /opt/dit (on UNIX with ENMS)
3. Select Tools->Install Component... menuitem.
4. In the Open dialog box, select the package and click on OK.
5. Another dialog box should come up showing the progress of the DIT install.
Select OK once DIT install is completed.
Installation Results:
--------------------------------------------------------------------------------
After successful installation an entry corresponding to Secure Router 1002 and
Secure Router 1002E v8.4.2 will be displayed in the OITAdmin Tool (DITAdmin Tool
in ENMS) main window.
MANAGEMENT FEATURES IN THIS RELEASE:
================================================================================
-- Device/Topology discovery and visualization
-- SNMP Traps and Fault correlation
-- Performance statistics via OmniView
-- Integration with HP OpenView and Tivoli NetView NMS platforms.
DIT PACKAGE CONTENTS:
================================================================================
install
install.bat
NMS_sr1002E_v842_A.dit
NMS_sr1002_v842_A.dit
trapreg.dlg
<mibs>
iana-iftype.mib
nortel.mib
ntEnterpriseData.mib
ntEnterpriseDataTasmanMgmtbundle.mib
ntEnterpriseDataTasmanMgmtchassis.mib
ntEnterpriseDataTasmanMgmtconfig.mib
ntEnterpriseDataTasmanMgmtdos.mib
ntEnterpriseDataTasmanMgmtdsx-tc.mib
ntEnterpriseDataTasmanMgmtdsx-te1.mib
ntEnterpriseDataTasmanMgmtdsx-te3.mib
ntEnterpriseDataTasmanMgmtenvironment.mib
ntEnterpriseDataTasmanMgmtethernet.mib
ntEnterpriseDataTasmanMgmtfr.mib
ntEnterpriseDataTasmanMgmtghdlc.mib
ntEnterpriseDataTasmanMgmtip.mib
ntEnterpriseDataTasmanMgmtppp.mib
ntEnterpriseDataTasmanMgmtqos.mib
ntEnterpriseDataTasmanMgmtserial.mib
ntEnterpriseDataTasmanMgmtsnAg.mib
ntEnterpriseDataTasmanMgmtsnmp.mib
ntEnterpriseDataTasmanMgmtsystem.mib
rfc1213.mib
rfc1315.mib
rfc1406.mib
rfc1407.mib
rfc1643.mib
rfc1657.mib
rfc1724.mib
rfc1850.mib
rfc1850b.mib
rfc2233.mib
rfc2787.mib
secure_router_v842_info.dat
secure_router_v842_info.mdb
snmpv2_tc.mib
<gifs>
sr-1000-16.gif
sr-1000-24.gif
SUPPORTED OPERATING SYSTEMS:
================================================================================
HPUX 11.0
Solaris 2.8
Solaris 2.9
Windows 2000
Windows 2003 Server
KNOWN LIMITATIONS:
================================================================================
CR Q01337171 - Duplicate entry in Infocenter for SR1000/3120.
When management IP address is higher than other configured IP
addresses, Infocenter displays multiple instances of the same
device (identical rows with same populated columns). This issue
occurs only on Solaris platform.
CR Q01202115 - Rediscovery doesn't work on ONMS 10.3.3
CR Q01336120 - Some OV panes don't update when data is cleared (IP Routing ->
BGP -> General pane)
CR Q01336129 - DIV: Empty columns for SR 1000 series and SR 3120
Serial No and HW Rev columns are empty for SR 1000 series and
SR 3120.
In the Module Information window most of the columns are empty
(Serial No, HW Rev, Descr, Sys OID).
CR Q01331475 - Auto Trap Registration for SR1000 series and SR 3120
CR Q01331446 - Syslog Registration for SR1000 series and SR 3120
CR Q01331451 - Platform files are copied read-only at ENMS install.
If you are using Netview and you want this device to be also
supported in that management system you must remove the read-only
attribute for the following files before installing the DIT
package:
Drive_letter:\usr\ov\fields\c\baynetworks.fields
Drive_letter:\usr\ov\symbols\c\baynetworks.symbols
CR Q01340351 - Two traps don't correlate well for SR 1000 series and SR 3120
The clear trap "T_bundleUpTrap_v1" doesn't clear the the previous
fault (generated by T_bundleUpTrap_v1)and a new fault is created.
The same problem appears for the trap T_linkUpTrap_v1.
================================================================================
(c) 2006 Nortel Incorporated. All rights reserved
================================================================================