REVISION NOTES FOR SITE MANAGER VERSION 14.00 REVISION 1 Site Manager Version 14.00 Revision 1 is a post 14.00 revision. This version is backwards compatible and supports the following BayRS (router software) versions: - 14.00, 14.00 Revision 1 - 13.00, 13.01, 13.02, 13.03, 13.04, 13.10, and 13.20 - 12.00, 12.01, 12.02, 12.03, 12.04, and 12.05 Note: When running revisions of BayRS in conjunction with a fix version of Site Manager, be aware that there may be new MIB attributes that were added in a router revision that are not supported in a Site Manager revision. Refer to the Revision Notes for both Site Manager and BayRS software. Site Manager 14.00 Revision 1 is Year 2000 Compliance Certified by Nortel Networks. It has successfully passed the Nortel Networks test procedure which tests conformance to the Nortel Networks Year 2000 definitions, found at the Nortel Networks Year 2000 Web site at: http://www.nortelnetworks.com/corporate/year2000/. ====================================================================== Site Manager Version 14.00 Revision 1 corrects the following problems: ====================================================================== CR 27856-1: SM-CONFIG When you are adding an OSPF Import Route Filter, the Import Tag parameter help incorrectly lists the Options as being from 1 to 2147483647 when it should be from 1 to 4294967295. CR 32414-1: APPN APPN is not supported over Ethernet LANE. CR 35357-1: BOT The help screen is missing for the Additional Sync Pairs parameter in the Edit BISYNC Parameters window. CR 75759-1: Frame Relay There is no option for configuring Multiline on a frame relay interface using Site Manager 6.20 and greater with BayRS Version 12.10 and earlier. CR 88057-1: Configuration Manager In the Select Protocols window, there is a gap between the NetBIOS and DECnet IV protocols. CR 90805-1: MPLS In the MPLS-LDP-Default VCs window, the online help for the Xmt PCR parameter and the Xmt SCR parameter need to be updated to include the value of 0 as an option. CR 105788-1: Configuration Manager On a router with a FRE2 060e card installed, when selecting Administration > Kernal Configuration, Site Manager does not show the FRE2 060e slot as an available slot. CR 106718-1: BGP When you attempt to set the parameters BGP Routes and BGP Weights, Site Manager returns an error. CR 106858-1: DLSw With Backup IP Address disabled, Site Manager allows you to configure DLSw backup peer parameters in the DLSw Peer Configuration window. CR 107046-1: IP When changing the Associated Address parameter for an IP unnumbered address, Site Manager does not save the change. CR 107172-1: X.25 Deleting a connector on an IPEX service record will not delete the IPEX mapping entries. CR 107506-1: Configuration Manager Using Configuration Manager in dynamic mode on HP-UX, trying to add a circuit using the Add Circuit buttons causes a core dump and an error message occurs. CR 107685-1: IP NAT allows configuring a private to public address mapping to map to the same IP address. CR 107749-1: DLSw When entering service access points (SAPs) in DLSw, Site Manager accepts values less than AA as two digits and does not allow any values greater than EC except F0. CR 108209-1: System 5000 Configuring dual Ethernet on a System 5000 hub causes Site Manager to fault when you attempt to add circuits at the Add Circuits window. CR 108564-1: Frame relay When configuring frame relay in Site Manager running under HP-UX, some protocols cannot be chosen. CR 109260-1: BGP When you delete a BGP circuit using Site Manager, the options under Circuits is limited to Add Circuit, even if multiple circuits exist. CR 110436-1: ATM LANE In the values selection window of Maximum Data Frame Size the options for 9234 and 18190 are not available for a token ring LANE interface. CR 110653-1: WCP If you open a file in local mode that has WCP loaded on slots with a FRE2 060e module, then save that file, the wfHwCompLoad MIB attribute is removed from all slots. CR 110729-1: ATM When dynamically editing an ATM interface on a router running BayRS Version 11.03 Revision Site Manager Version, an �SNMP Set Error" is reported. CR 110750-1: ATM LANE Dynamically deleting an emulated LAN doesn�t delete the associated circuit from the main circuit related line list. CR 111228-1: FDDI When you try to configure a FDDI circuit, the FDDI Expert screen is unavailable. CR 112624-1: X.25 The Help screen in Site Manager for X.25 packet level �SVC LCN Start� is incorrect. CR 112826-1: Frame relay When you delete a group mode PVC and click on Apply, the following error message appears: Invalid Data entered for �Encrypt Enable!� CR 113092-1: ATM When configuring an ATM circuit with a data encapsulation type of null, and a connection type of PVC, the OAM Alarm field is displayed twice on the Virtual Channel Link window. CR 113453-1: Frame relay Site Manager allows RSVP to be configured on a frame relay interface, causing the router to continuously restart. CR 113488-1: PPP When install.bat was used to configure a PPP circuit for Site Manager, connecting to an AN or ARN router causes PPP to unload from the router. CR 114325-1: Configuration Manager When you try to modify a router�s configuration with Site Manager and the BCC is in Config mode on the router, you receive a message that says that you need to exit configuration mode in the BCC and then either apply your changes in Site Manager or select Cancel to get back to where you were in Site Manager. If you do not choose to exit BCC Config but do want to cancel out of Site Manager, you cannot. The only way to get out of this screen is to exit BCC Config mode. CR 114605-1: IPX When modifying an existing IPX interface, Site Manager displays the invalid value 3 in the RIP/SAP Immediate Update field when the configuration file is less than BayRS Version 13.03. CR 114675-1: NBIP Deleting a circuit on which NBIP is configured fails to delete the corresponding wfCircuitNameEntry for that circuit. This problem only affects circuits that have been assigned circuit numbers that are greater than 9. CR 116745-1: ISDN Trying to configure an ISDN port from the Add Circuit window (accessed from Circuits > Add Circuits) causes a core dump. CR 116749-1: ATM When trying to change the ARP mode on a PVC service record from ARP to None, Site Manager returns an error message. CR 116853-1: Pktdump The Pktdump utility Version 1.3 places an incorrect date on the packet. CR 117033-1: Report Generator When viewing a report created with Report Generator there is a discrepancy in the value of the MIB attribute wfIpIntfCfgEntry.wfIpIntfCfgSlotMask as 2147483647 on the report versus the actual value 4294705152 of the MIB on the router. CR 117213-1: Statistics Manager In the Statistics Manager screen CSMACD Misc Errors there is a misaligned column. CR 117294-1: OSPF When the OSPF global parameter Multicast Extension is set to any value but none, several fields are not available within the Site Manager interface. CR 117310-1: OSPF The virtual interface configuration screen for OSPF does not display the correct detail information for the fields Transit Area ID and Neighbors Router ID. CR 117645-1: Events Manager The number of records shown in the Events Manager is less than the number of records actually being displayed. CR 118255-1: Configuration Manager Using Site Manager Configuration Manager in remote mode to configure a router, when you save the configuration file, it does not get transferred to the router that you are trying to configure. CR 118446-1: DVMRP On a router that has OSPF and DVMRP configured on an interface, if you use Site Manager to delete and then add DVMRP, DVMRP does not appear to be configured.