============================================================================= REVISION NOTES FOR SITE MANAGER VERSION 6.05 REVISION 1 ============================================================================= Site Manager Version 6.05 Revision 1 is a post 5.00 revision. This version is backwards compatible and supports the following BayRS (router software) versions: 12.05 12.04 12.03 12.02 12.01 11.03 11.02 11.01 11.00 Note: When running revisions of BayRS in conjunction with a fix version of Site Manager, be aware that there may be new MIB attributes that were added in a router revision that are not supported in a Site Manager revision. Refer to the Revision Notes for both Site Manager and BayRS software. 6.05 Revision 1 is Year 2000 Compliance Certified by Nortel Networks. It has successfully passed Nortel Networks Test Procedure which tests conformance to Nortel Networks Year 2000 compliance definition, both of which can be found at Nortel Networks Year 2000 Web site at http://www.nortelnetworks.com/corporate/ year2000/. =================================================================== 6.05 Revision 1 corrects the following problems: =================================================================== CR 74482: QMCT1 Deleting a QMCT1 link module port using the Configuration Manager in Dynamic mode does not remove its wfDs1E1PortEntry instance. CR 80561: TFTP Executing large numbers of TFTP transfers on a PC can cause general protection faults to occur. CR 91577: IP There is a compatibility problem with Site Manager on HP/UX 10.20 with the X/Motif 1.2 Libraries Y2K patch (PHSS_13113, PHSS_14040, and PHSS_16120). When you use Events -> Load Local Log Files, the message "Log Browser module completed abnormally (E1701)" incorrectly displays. Also, when you choose router types in a local file configuration, the window color obscures the clear display of router types. CR 97013: SNMP The color mapping at the LAN and WAN Protocols Selection windows in Site Manager/HP_UX obscures the display, making the windows illegible. CR 105902: ASN2 The ASN2 router restarts during a boot because it cannot locate the wfHwCfgEntry entry when it is not the first entry in the hardware.ldb file. CR 105944: SNMP Site Manager does not display Technician Interface traps sent by the router in the Trap Monitor window. CR 106708: Spanning Tree Spanning tree root selection fails with either SRB or LB spanning tree configured on a null encapsulated ATM PVC service record. CR 106858: DLSw Able to configure backup peer parameters with Backup Config option set to disabled. CR 106866: IP Attempts to change an IP interface address that has multiple criteria traffic filters can cause Configuration Manager to fault and terminate with no error message. This only occurs during attempts to change the first IP instance. CR 107046: IP In Site Manager, selecting Protocols > IP > Interfaces > Change to change the address on an interface, the change is not carried through to the Associated Address for an IP Unnumbered Interface. CR 107359: IP Using the rename option in File Manager to execute a TFTP file transfer from the router to the local machine can cause a duplication of the files transferred. CR 107591: Event Manager Typing a file name without the associated path while saving a log in Event Manager can cause a core dump to occur. CR 107606: ATM Solaris/Site Manager can freeze up when deleting an active ATM circuit. CR 107816: Report Generator A core dump can occur in Site Manager when you generate reports in Report Generator using template files. CR 108254: Image Builder Attempts to select a directory by typing the complete path are unsuccessful when you use the file Open or Save options in Image Builder. CR 109260: BGP When you try to delete BGP on an interface using Site Manager, only the Add Circuit option is highlighted under Circuits in the Configuration Manager even if multiple circuits exist. CR 109261: Events Manager Site Manager running on an HP/UX platform does not successfully save output to disk when configuring within Events Manager. CR 109975: ATM When an ATM ARE circuit is created on an BCN/BLN and run in Report Generator, the Site Manager Line Mapping entry table shows corrupt data. CR 110436: ATM Under Token-Ring LANE there is no option to set the maximum frame size, although this capability exists in the MIB and using the BCC. |
Copyright © & SEC Notice
, 1998, Nortel Networks,Inc. All rights reserved.