Displays IS-IS counter information.
| URI | Description |
|---|---|
| <base_URI>/operational-state/counts-state | Display IS-IS counters information |
| <base_URI>/operational-state/counts-state/areamis | Displays Area Mismatch count |
| <base_URI>/operational-state/counts-state/maxareamis | Displays Max Area Mismatch count |
| <base_URI>/operational-state/counts-state/badidlen | Displays System ID Length Mismatch count |
| <base_URI>/operational-state/counts-state/seqskip | Displays LSP Sequence Number Skipped count |
| <base_URI>/operational-state/counts-state/seqerr | Displays LSP Sequence error counts |
| <base_URI>/operational-state/counts-state/l1dbol | Displays Level-1 Database Overload count |
| <base_URI>/operational-state/counts-state/l2dbol | Displays Level-2 Database Overload count |
| <base_URI>/operational-state/counts-state/ownpurge | Displays Our LSP Purged count |
| <base_URI>/operational-state/counts-state/csnp-l1authfail | Displays CSNP Level-1 Auth Failures count |
| <base_URI>/operational-state/counts-state/csnp-l2authfail | Displays CSNP Level-2 Auth Failures count |
| <base_URI>/operational-state/counts-state/psnp-l1authfail | Displays PSNP Level-1 Auth Failures count |
| <base_URI>/operational-state/counts-state/psnp-l2authfail | Displays PSNP Level-2 Auth Failures count |
| <base_URI>/operational-state/counts-state/circ-l1authfail | Displays LSP Level-1 Auth Failures count |
| <base_URI>/operational-state/counts-state/circ-l2authfail | Displays LSP Level-2 Auth Failures count |
| <base_URI>/operational-state/counts-state/bad-lsp-log | Displays Bad LSP log |
| <base_URI>/operational-state/counts-state/bad-lsp-log/{type-index}/time-stamp | Displays Bad LSP time-stamp |
| <base_URI>/operational-state/counts-state/bad-lsp-log/{type-index}/l1-count | Displays Bad LSP l1 count |
| <base_URI>/operational-state/counts-state/bad-lsp-log/{type-index}/l2-count | Displays Bad LSP l2 count |
Only GET operation is supported. Use of the Resource-Depth request header is recommended.
The following example uses the GET option to retrieve the configuration details.
http://host:80/rest/operational-state/counts-state
None
<counts-state xmlns="urn:brocade.com:mgmt:brocade-isis-operational" y:self="/rest/operational-state/counts-state">
<areamis>0</areamis>
<maxareamis>0</maxareamis>
<badidlen>0</badidlen>
<seqskip>2</seqskip>
<seqerr>0</seqerr>
<l1dbol>0</l1dbol>
<l2dbol>0</l2dbol>
<ownpurge>0</ownpurge>
<csnp-l1authfail>0</csnp-l1authfail>
<csnp-l2authfail>0</csnp-l2authfail>
<psnp-l1authfail>0</psnp-l1authfail>
<psnp-l2authfail>0</psnp-l2authfail>
<circ-l1authfail>0</circ-l1authfail>
<circ-l2authfail>0</circ-l2authfail>
<bad-lsp-log y:self="/rest/operational-state/counts-state/bad-lsp-log/1">
<type-index>1</type-index>
<time-stamp>0</time-stamp>
<l1-count>0</l1-count>
<l2-count>0</l2-count>
</bad-lsp-log>
<bad-lsp-log y:self="/rest/operational-state/counts-state/bad-lsp-log/2">
<type-index>2</type-index>
<time-stamp>0</time-stamp>
<l1-count>0</l1-count>
<l2-count>0</l2-count>
</bad-lsp-log>
<bad-lsp-log y:self="/rest/operational-state/counts-state/bad-lsp-log/3">
<type-index>3</type-index>
<time-stamp>0</time-stamp>
<l1-count>0</l1-count>
<l2-count>0</l2-count>
</bad-lsp-log>
<bad-lsp-log y:self="/rest/operational-state/counts-state/bad-lsp-log/4">
<type-index>4</type-index>
<time-stamp>0</time-stamp>
<l1-count>0</l1-count>
<l2-count>0</l2-count>
</bad-lsp-log>
<bad-lsp-log y:self="/rest/operational-state/counts-state/bad-lsp-log/5">
<type-index>5</type-index>
<time-stamp>0</time-stamp>
<l1-count>0</l1-count>
<l2-count>0</l2-count>
</bad-lsp-log>
<bad-lsp-log y:self="/rest/operational-state/counts-state/bad-lsp-log/6">
<type-index>6</type-index>
<time-stamp>0</time-stamp>
<l1-count>0</l1-count>
<l2-count>0</l2-count>
</bad-lsp-log>
<bad-lsp-log y:self="/rest/operational-state/counts-state/bad-lsp-log/7">
<type-index>7</type-index>
<time-stamp>0</time-stamp>
<l1-count>0</l1-count>
<l2-count>0</l2-count>
</bad-lsp-log>
<bad-lsp-log y:self="/rest/operational-state/counts-state/bad-lsp-log/8">
<type-index>8</type-index>
<time-stamp>0</time-stamp>
<l1-count>0</l1-count>
<l2-count>0</l2-count>
</bad-lsp-log>
<bad-lsp-log y:self="/rest/operational-state/counts-state/bad-lsp-log/9">
<type-index>9</type-index>
<time-stamp>0</time-stamp>
<l1-count>0</l1-count>
<l2-count>0</l2-count>
</bad-lsp-log>
<bad-lsp-log y:self="/rest/operational-state/counts-state/bad-lsp-log/10">
<type-index>10</type-index>
<time-stamp>0</time-stamp>
<l1-count>0</l1-count>
<l2-count>0</l2-count>
</bad-lsp-log>
</counts-state>