Removing a Switch from a Rack

Before removing a switch from a rack, verify that:
Note

Note

Read the following steps thoroughly before you attempt to remove a switch from a rack.

To remove a switch from a rack, follow these steps:

  1. Support the switch while you remove the rack-mounting screws that hold the front mounting brackets in place against the rack posts.
  2. Remove the switch from the rack.
    • For two-post installations, carefully slide the switch out of the rack.
    • For four-post installations, carefully slide the switch forward out of the cabinet and off the rear mounting brackets.
    See the following figures.
    Click to expand in new window
    Removing a Front-Mounted Switch from a Two-Post Rack
    ../Graphics/SH_130.svg
    Click to expand in new window
    Removing the Switch from a Four-Post Rack
    ../Graphics/SH_148.svg
  3. Place the switch on a secure, flat surface.
  4. Using a #1 Phillips screwdriver, remove the front mounting brackets from the sides of the switch.
  5. For four-post installations, remove the rear mounting brackets from the rear rack posts.