Removing an EPS-600LS Power Module

Removing an EPS-600LS power module enables a graceful power transition from the external power supplies to the internal power supply.

To remove the power module, follow these steps:

  1. Disconnect the AC power by removing the plug from the wall.
  2. Release the cable clip securing the AC power cord to the EPS-600LS power module.
  3. Disconnect the AC power cord from the EPS-600LS power module.
  4. On the EPS-600LS power module, loosen the captive screws that secure it to the EPS-C chassis.
  5. Slide the EPS-600LS power module out of the EPS-C chassis.