Installing an EPS-500 External Power Supply Unit

You can position the EPS-500 facing either the front or the back of the rack.

For this reason, each unit has two sets of mounting holes on each side. Extreme Networks recommends that you position the EPS-500 unit so that the power output connectors of the EPS-500 unit are on the same side as the external connector on the connecting switch.

The EPS-500 unit can be mounted in a rack or placed free-standing on a table.



An AC power cord is not provided with the EPS-500 unit. See Power Cord Requirements for AC-Powered Switches and AC Power Supplies for information about selecting a power cord.