Installing an EPS-C2 Chassis

EPS-C2 Power System Chassis and Switch shows an EPS-C2 chassis mounted above a switch in a rack.
Click to expand in new window
EPS-C2 Power System Chassis and Switch
../Graphics/eps-c2_01.png

To mount the EPS-C2 chassis in a 19-inch rack, follow these steps:

  1. Place the EPS-C2 chassis upright on a secure work surface.
  2. Remove the mounting bracket kit from the packaging.
  3. Attach the mounting brackets as follows:
    1. Place a mounting bracket over the mounting holes on one side of the EPS-C2 (see Attaching the Mounting Bracket to the EPS-C2 Chassis).
    2. Insert the screws and fully tighten them using a screwdriver.
      Click to expand in new window
      Attaching the Mounting Bracket to the EPS-C2 Chassis
      ../Graphics/Eps-c2_11_rack.svg
    3. Attach the mounting bracket for the other side of the EPS-C2.
  4. Slide the EPS-C2 into the rack and secure it using appropriate rack-mount screws.
    See Sliding the EPS-C2 into the Rack and Securing it.
    Click to expand in new window
    Sliding the EPS-C2 into the Rack and Securing it
    ../Graphics/Eps-c2_10_rack.svg