Connecting the Ground Wire to an 850 W DC Power Supply

Warning

Warning

Be sure to connect the chassis ground wire before you connect any power cables.

Warning

Warning

Be sure to disconnect the ground wire after you disconnect all power cables.

To connect the ground wire:

  1. Verify that the DC circuit is de-energized.
  2. Identify the grounding point on the front panel of the power supply.
    Click to expand in new window
    Connecting the Ground Wire
    ../Graphics/SH_108.svg
    1 = Grounding point 2 = Ground wire
  3. Insert an M3.5 screw (provided) through the ring terminal and into the grounding point on the power supply.
  4. Tighten the screw to 12.6 in‑lb (1.42 N m).
  5. Connect the other end of the wire to a known reliable earth ground point at your site.