Summit X350 Series Switches

The Summit X350 series switches provide 24 or 48 Ethernet ports that deliver high-density fast Ethernet connectivity using fixed 10/100/1000BASE-T ports.

Each Summit X350 series switch has four combination ports that provide 10/100/1000 BASE-T or SFP connectivity for 2 Gbps of copper or fiber connectivity. A serial console port on the front panel allows you to connect a terminal and perform local management. An Ethernet management port can be used to connect the system to a parallel management network for administration. Alternatively, you can use an Ethernet cable to connect this port directly to a laptop to view and locally manage the switch configurations.

The rear panel of the switch has an option slot to accommodate one of the following Summit port option cards:
  • Summit XGM2-2xf option card, which allows you to add one or two 10-gigabit XFP modules.
  • Summit XGM2-2xn option card, which allows you to add one or two 10-gigabit XFP modules.
  • Summit XGM2-2bt option card, which allows you to add one or two fixed 10GBASE-T ports.
  • Summit XGM2-2sf option card, which allows you to add one or two 10-gigabit SFP+ modules.

For option card installation instructions, see Installing Port Option Cards and VIMs.

Power connectors on the rear panel of the switch include an AC power input socket and a redundant power connector. The internal AC power supply operates from 100 VAC to 240 VAC. The switch automatically adjusts to the supply voltage. The redundant power connector allows you to connect the switch to the EPS-500 external power supply. When a compatible external power supply is used with the Summit X350 series switch, the internal and external power supplies are fully fault tolerant and load-sharing. If one power supply fails, the other power supply provides sufficient power to operate the switch.

The Summit X350 series switches include the following models:
Note

Note

In the descriptions that follow, references to a Summit X350 series model number also apply to the equivalent TAA-compliant switch version.

Summit X350 series switches require an ExtremeXOS version of at least 12.0.3.16 but not greater than 15.3.x.