Summit X440-48t Switch Ports and Slots
The front panel of the Summit X440-48t switch includes:
-
Forty-eight fixed autosensing 10/100/1000BASE-T ports (ports 1–48) that provide 48 Gbps of high-density copper connectivity.
-
Four unpopulated SFP ports (ports 45–48) that provide 4 Gbps of fiber connectivity. The SFP ports support both 100BASE-FX and 1000BASE-X optical modules.
Ports 45 through 48 are implemented as shared ports that pair a copper port with a fiber port. For more information about combination ports, see Combination Ports and Failover.
For information about SFPs, see the Extreme Networks Pluggable Transceivers Installation Guide.
-
Ethernet management port.
-
Serial console port implemented as an RJ45 connector, used to connect a terminal and perform local management.
-
LEDs to indicate port status and switch operating conditions.
For a description of the LEDs and their operation, see Summit X440 Series Switch LEDs.
-
Stack number indicator.

1 = Ethernet management port | 4 = Stack number indicator |
2 = 10/100/1000BASE-T ports | 5 = Console port |
3 = SFP ports | 6 = Combination ports |
-
Two high-performance stacking ports with associated LEDs.
-
Redundant power input connector for optional connection to the EPS-C2 External Power Module
The connecting redundant power supply cable is shipped with the power module unit. See Installing an EPS-C2 Power Supply for more information.
-
AC power input connector.
-
The internal AC power supply operates from 100 VAC to 240 VAC.

1 = AC power input connector | 3 = Redundant power connector |
2 = Stacking ports |