antennaright

Use the antennaright command to select an antenna supported by the Wireless AP. This command is accessible from the <serial> context of the CLI if the AP supports configuration of a right antenna. To display a list of the available antenna models, enter the command without arguments.

The antenna commands available are dependent on the AP type.

antennaright antenna_model

Parameters

antenna_model Model name of an antenna supported by the Wireless AP.

Examples

This example lists the valid antenna models that can be entered with this command, then executes the command with an appropriate model number:

EWC.extremenetworks.com:ap:0500010032150135# antennaright Usage: antennaright <antenna_model>
antenna_model:
<list of valid antenna models>
WS-ANT01 AG 4dBi Omni Factory
No Antenna
EWC.extremenetworks.com:ap:0500010032150135# antennaright WS-ANT01 AG 4dBi Omni Factory

This example removes a configured right antenna:

EWC.extremenetworks.com:ap:0500010032150135# antennaright No Antenna