mrinfo

mrinfo {router_address} {from from_address} {timeout seconds} {multiple-response-timeout multi_resp_timeout} {vr vrname}

Description

Requests information from a multicast router.

Syntax Description

router_address Specifies the unicast IP address of the router for which you want information.
from_address Specifies the unicast IP address of the interface where the mrinfo request is generated.
seconds Specifies a maximum time to wait for a response. The range is 1–30 seconds.
multi_resp_timeout Specifies a maximum time to wait for additional responses after the first response is received. The range is 0 to 3 seconds.
vrname Specifies a VR name.

Default

router_address: One of the local interface addresses.

from_address: IP address of interface from which the mrinfo query is generated.

timeout: 3 seconds

multiple-response-timeout: 1 second

vr: DefaultVR

Usage Guidelines

The last column of the mrinfo command output displays information in the following format:

[Metric/threshold/type/flags]

This information is described in detail in the Syntax Description..

Click to expand in new window

mrinfo Command Display Data

Data Description
Metric This should always be 1 because mrinfo queries the directly connected interfaces of a device.
Threshold This should always be 0 because the threshold feature is not supported in ExtremeXOS software.
Type The type specifies the multicast protocol type. Because the ExtremeXOS software only supports PIM, this value is always pim.
querier The querier flag indicates that the queried router is the IGMP querier.
leaf The leaf flag indicates that the IP interface has no neighbor router.
down The down flag indicates that the interface link status is down.

Example

The following command requests information from multicast router 1.1.1.1:

Switch.1 # mrinfo 1.1.1.1
1.1.1.1 [Flags:PGM]
2.2.2.1 -> 2.2.2.2 [1/0/pim/querier]
1.1.1.1 -> 0.0.0.0 [1/0/pim/querier/leaf]
8.8.8.1 -> 8.8.8.4 [1/0/pim/querier]
3.3.3.1 -> 0.0.0.0 [1/0/pim/down]

History

This command was first available in ExtremeXOS 12.4.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the IPv4 multicast feature, see the Feature License Requirements document.