Important
The Edge Automation feature is a demonstration feature that is provided for testing purposes. Demonstration features are for lab use only and are not for use in a production environment. Please work with your Extreme Networks sales team to request a demonstration.Connects or disconnects an Automation Edge remote VXLAN network identifier (VNI)-device database.
automation | Designates configuring Automation Edge VXLAN VNI-device database information. |
edge | Designates configuring Automation Edge VXLAN VNI-device database information. |
connect | Designates connecting to the specified database. |
disconnect | Designates disconnecting from the specified database. |
database | Designates connecting or disconnecting a database. |
database_name | Sets the database name that you are connecting or disconnecting. |
N/A.
To connect to another new database, an existing database must be disconnected first. To view the connected database, use the command show database database_name
The following example connects the database "database1":
# configure automation edge connect database database1
The following example disconnects the database "database1":
# configure automation edge disconnect database database1
This command was first available in ExtremeXOS 31.1.
This command is available on ExtremeSwitching X465, X590, X670-G2, X690, X695, X870, 5520 series switches.