show iqagent

show iqagent discovery

Description

Displays information about the ExtremeCloud™ IQ Agent.

Syntax Description


iqagent	Specifies showing information about IQ Agent.
discovery	Specifies showing information about IQ Agent discovery.

Default

N/A.

Usage Guidelines

If IQ Agent is not running, only the first section appears. A device is registered on an IQ server using the serial number.

Example

The following example shows information about IQ Agent:

# show iqagent
----------------------------------  --------------------------------------------
State                               Enabled
Active VR                           VR-Mgmt
Detected VR                         VR-Mgmt
XIQ Address                         10.16.231.95
Serial Number                       1405G-00056
----------------------------------  --------------------------------------------

The following example shows discovery information for IQ Agent:

# show iqagent discovery
-----------------------------------------------------------------------------
Virtual-Router  : VR-Default
  XIQ FQDN CLI  :
  XIQ DHCP IP   :
  XIQ DHCP FQDN : test.com
  Redirector    :
-----------------------------------------------------------------------------
Virtual-Router  : VR-Mgmt
  XIQ FQDN CLI  : 10.16.231.95
  XIQ DHCP IP   : 1.2.3.4
  XIQ DHCP FQDN : test2.com
  Redirector    :
-----------------------------------------------------------------------------

History

This command was first available in ExtremeXOS 30.7.

IQ Agent status was added in ExtremeXOS 31.1.

Platform Availability

This command is available ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, and 5520 series switches.