configure mpls rsvp-te metric

configure mpls rsvp-te metric [value | use-igp] {vlan} vlan_name

Description

Configures the TE metric value for the RSVP-TE interface specified by the vlan_name argument.

Syntax Description

value Specifies a value for the RSVP-TE metric.
vlan Specifies that the RSVP-TE metric is configured for a specific VLAN.
vlan_name Identifies the VLAN for which the RSVP-TE metric is configured.

Default

The associated default IGP metric.

Usage Guidelines

The TE metric can be any unsigned non-zero 32-bit integer. The default value for the RSVP-TE interface is to use the associated default IGP metric. The TE metric is exchanged between OSPF routers and is used in the calculation of the CSPF topology graph.

Example

The following command configures an RSVP-TE metric of 220 on the specified VLAN:

configure mpls rsvp-te metric 220 vlan vlan_10

History

This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available only on the platforms that support MPLS as described in the ExtremeXOS 32.3 Feature License Requirements document.