Displays the configured number of IPv4 and IPv6 routes reserved in the Longest Prefix Match (LPM) hardware table.
| slot_num | For SummitStack only, this option displays the reservations for the specified slot. |
N/A.
The IPv4 Routes column in the command output shows whether IPv4 routes are stored in LPM tables.
To modify the configuration that this command displays, use the following command:
configure iproute reserved-entries [ num_routes_needed | maximum | default ] slot [all |slot_num]The following example displays the reserved space for IP routes:
Slot-3 Stack.30 # show iproute reserved-entries
# Reserved Routes Minimum #
Slot Type IPv4 (or IPv6) IPv4 Hosts
---- ---------------- ------- ------------------ ----------
1 X460G2-48t-10G4 8144 ( 4072) 4112
2 X460G2-48t-10G4 8144 ( 4072) 4112
3 X670G2-48x-4q 12240 ( 6120) [default] 4112
4
5
6
7
8
Maximum supported # IPv4 (or IPv6) Reserved Routes:
X435 32 ( 16)
X440G2, X620 480 ( 240)
X460G2 12256 ( 6128)
X450G2, X460G2-16MP 16352 ( 8176)
X465, X590, 16352 ( 8176)
X695 32736 ( 16368)
Note: IPv4 Hosts can occupy unused HW Route table space,
unless # Reserved Routes is "maximum".
This command was first available in ExtremeXOS 12.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.