The CLI contains several execution modes. Users will see different set of commands under different execution modes. The following table lists all the execution modes and their purposes. When you enter a certain execution mode, the corresponding mode prompt will be displayed automatically on the screen. The mode prompts of all the execution modes are also listed in the following table.
| Mode | Access Level | Prompt |
|---|---|---|
| Init Mode | Guest | > |
| Enable Mode | Guest | # |
| Config Mode | Guest | (conf)# |
| Alarm Profile Config Mode | Engineer | (alarm-profile-conf)# |
| Gigabit Interface Config Mode | Engineer | (gigabit-intf-conf)# |
| ACL Profile Config Mode | Engineer | (acl-profile-conf)# |
| scheduler Profile Config Mode | Engineer | (sch-profile-conf)# |
| VLAN Interface Config Mode | Engineer | (vlan-intf-conf)# |
| IGMP MVR Profile Config Mode | Engineer | (igmp-mvr-profile-conf)# |
| IGMP ACL Profile Config Mode | Engineer | (igmp-acl-profile-conf)# |
| RingV2 Group Config Mode | Engineer | (ring)# |
| Trunk Group Config Mode | Engineer | (trunk-group-conf)# |