Part numbers: 10338, AA1403043-E6
The 10GBASE-T copper SFP+ module provides a 10 Gb connection using unshielded twisted pair (UTP) Category 6A cable. The module uses an RJ45 connector.
Note
The 10GBASE-T copper SFP+ module operates only at 10 Gb speed.The supported configuration for this module is to populate every second 10 Gb SFP+ port in the system, with no more than half of the 10 Gb SFP+ ports configured with these modules. For every 10GBASE-T copper SFP+ module that is installed, an adjacent SFP+ port must remain unused.
For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.
Transmission distances are provided as a nominal guide only.
The 10GBASE-T copper SFP+ module is compatible with the Gigabit Ethernet 10GBASE-T standard, up to distances of 30 meters.
The 10GBASE-T copper SFP+ module operates at a temperature range of -5°C to 85°C.
The following table lists specifications for the 10GBASE-T copper SFP+ module.
| Parameter | Value |
|---|---|
| Connector | RJ45 |
| Link distance for each speed | |
| 10 Gbps | 30 m using Cat6a cable or better |