show iproute ipv6

show iproute ipv6 {priority | vlan vlan_name | tunnel tunnel_name | ipv6Netmask | summary {multicast | unicast}} {vr vr_name}}

Description

Displays the contents of the IPv6 routing table.

Syntax Description

priority Displays the priority values for each route origin type.
vlan_name Specifies a VLAN name.
tunnel_name Specifies a tunnel name.
ipv6Netmask Specifies an IPv6 address/prefix length.
summary Specifies summary information.
vr_name Specifies a VR or VRF.

Default

N/A.

Usage Guidelines

If you do not specify a VR or VRF, the command applies to the current VR context.

Example

The following example displays detailed information about all IPv6 routing:

Switch.18 # show iproute ipv6
Ori Destination                                   Mtr  Flags        Duration
Gateway                                       Interface
*hm 2000::/128                                    1    UGHD---u---f- 0d:0h:0m:7s 
#d  2001:db8::/64                                 1    U------um--f 0d:0h:5m:31s
2001:db8::52                                  ixia
#or 2001:db8:2:78::/64                            50   UG-D---um--f 0d:0h:0m:1s
fe80::200:40ff:feba:a38e                      ixia
#or 2001:db8:2:79::/64                            50   UG-D---um--f 0d:0h:0m:1s
fe80::200:40ff:feba:a38e                      ixia
#or 2001:db8:2:7a::/64                            50   UG-D---um--f 0d:0h:0m:1s
fe80::200:40ff:feba:a38e                      ixia
#or 2001:db8:2:7b::/64                            50   UG-D---um--f 0d:0h:0m:1s
fe80::200:40ff:feba:a38e                      ixia
#or 2001:db8:2:7c::/64                            50   UG-D---um--f 0d:0h:0m:1s
fe80::200:40ff:feba:a38e                      ixia
#or 2001:db8:2:7d::/64                            50   UG-D---um--f 0d:0h:0m:1s
fe80::200:40ff:feba:a38e                      ixia
#or 2001:db8:2:7e::/64                            50   UG-D---um--f 0d:0h:0m:1s
fe80::200:40ff:feba:a38e                      ixia
#or 2001:db8:2:7f::/64                            50   UG-D---um--f 0d:0h:0m:1s
fe80::200:40ff:feba:a38e                      ixia
#or 2001:db8:2:80::/64                            50   UG-D---um--f 0d:0h:0m:1s
fe80::200:40ff:feba:a38e                      ixia
#or 2001:db8:2:81::/64                            50   UG-D---um--f 0d:0h:0m:1s
fe80::200:40ff:feba:a38e                      ixia
#d  fe80::%ixia/64                                1    U------um--f 0d:0h:5m:31s
fe80::204:96ff:fe27:8697                      ixia
Origin(Ori): (b) BlackHole, (be) EBGP, (bg) BGP, (bi) IBGP, (bo) BOOTP
(ct) CBT, (d) Direct, (df) DownIF, (dv) DVMRP, (e1) ISISL1Ext
(e2) ISISL2Ext, (h) Hardcoded, (i) ICMP, (i1) ISISL1 (i2) ISISL2
(is) ISIS, (mb) MBGP, (mbe) MBGPExt, (mbi) MBGPInter, (ma) MPLSIntra
(mr) MPLSInter, (mo) MOSPF (o) OSPFv3, (o1) OSPFv3Ext1, (o2) OSPFv3Ext2
(oa) OSPFv3Intra, (oe) OSPFv3AsExt, (or) OSPFv3Inter, (pd) PIM-DM, (ps) PIM-SM
(r) RIPng, (ra) RtAdvrt, (s) Static, (sv) SLB_VIP, (hm) Host-mobility, (un) UnKnown
(*) Preferred unicast route (@) Preferred multicast route
(#) Preferred unicast and multicast route
Flags: (b) BFD protection requested, (B) BlackHole, (c) Compressed, (D) Dynamic,
       (f) Provided to FIB, (G) Gateway, (H) Host Route,
       (I) ICMP ping protection requested, (l) Calculated LDP LSP,
       (L) Matching LDP LSP, (m) Multicast, (p) BFD protection active,
       (P) LPM-routing, (R) Modified, (s) Static LSP, (S) Static,
       (t) Calculated RSVP-TE LSP, (T) Matching RSVP-TE LSP, (u) Unicast,
       (U) Up, (3) L3VPN Route.
Mask distribution:
12 routes at length  64
Route Origin distribution:
2 routes from Direct              10 routes from OSPFv3Inter
Total number of routes = 12
Total number of compressed routes = 0

The following example displays the IPv6 route origin priority:

# show iproute ipv6 priority
Direct 10
Blackhole 50
Static 1100
ICMP 1200
OSPFv3Intra 2200
OSPFv3Inter 2300
Isis 2350
IsisL1 2360
IsisL2 2370
RIPng 2400
OSPFv3AsExt 3100
OSPFv3Ext1 3200
OSPFv3Ext2 3300
IsisL1Ext 3400
IsisL2Ext 3500

History

This command was first available in ExtremeXOS 11.2.

The hm flag was added in ExtremeXOS 16.2

Support added for host mobility in ExtremeXOS 16.2.

"I" flag added showing ICMP ping protection in ExtremeXOS 16.1.3-Patch1-7.

Platform Availability

This command is available on the platforms listed for the IPv6 unicast routing feature.