configure pim dense-neighbor-check

Add the following command to the ExtremeXOS 21.1 Command Reference Guide
configure pim dense-neighbor-check [on | off}

Description

This command is used to configure a PIM interface that receives multicast data traffic. It could be either from a source directly connected or from a PIM neighbor. In the second case (from a source not directly connected), if the received interface has no PIM neighbor, the traffic is dropped (default behavior). If you turn off this check, the traffic is processed.

Syntax Description

dense-neighbor-check Check if multicast traffic is received from PIM neighbor in dense mode.
on Drop multicast traffic if not received from PIM neighbor (default).
off Forward multicast traffic even if not received from PIM dense neighbor.

Default

The default is on.

Example

The following example turns on dense neighbor check:

configure pim dense-neighbor-check on

History

This command was first available in ExtremeXOS 15.1.4.

Platform Availability

This command is available on platforms that support the appropriate license. For more information, see the ExtremeXOS 21.1 Feature License Requirements.