configure inline-power operator-limit
ports
    
    
        
            configure inline-power operator-limit milliwatts
                ports [all |port_list] 
        
        Description
            
            Sets the power limit allowed for PDs connected to the specified ports.
        
        Syntax Description
            
            
                        
                            | 
                                milliwatts
                             | 
                            An integer specifying the maximum allowed power in
                                milliwatts. | 
                        
                        
                            | 
                                port_list
                             | 
                            Specifies one or more ports or slots and
                                ports. | 
                        
                    
        
        Default
            
            PoE—15,400 mW.
            PoE+—30,000 mW.
            PoE++ Type 3—60,000 mW.
            PoE++ Type 4—90,000 mW.
        
        Usage Guidelines
            
            This command sets the power limit that a PD can draw on the specified
                ports. For PoE, the range is 3000 to 16800mW and the default value is 15400 mW. For
                PoE+, the range is 3,000 to 30,000 mW and the default value is 30000 mW. For PoE++
                Type 3, the range is 3,000 mW to 60,000 mW and the default value is 60,000 mW. For
                PoE++ Type 4, the range is 3,000 mW to 90,000 mW and the default value is 90,000
                mW.
            If the measured power for a specified port exceeds the port‘s operator limit, the
                power is withdrawn from that port and the port moves into a fault state.
            If you try to set an operator-limit outside the accepted range, the system returns
                the following error message:
            Error: Invalid operator-limit value. Must be in the range of 3000-90000 mW for PoE 802.3bt port
        
        Example
            
            The following command sets the limit for legacy PDs on ports 3–6 of slot 5 on a
                SummitStack to 10000 mW:
            configure inline-power operator-limit 10000 ports 5:3-5:6
         
        History
            
            This command was first available in ExtremeXOS 11.1.
        
        Platform Availability
            
            This command is available on:
        
        PoE+
            
            
                    - ExtremeSwitching
                            5420F-8W-16P-4XE—ExtremeXOS 31.3 and
                        later.
 
                    - ExtremeSwitching
                            5420F-24P-4XE—ExtremeXOS 31.3 and
                        later.
 
                    - ExtremeSwitching
                            5420F-16MW-32P-4XE—ExtremeXOS 31.3 and
                        later.
 
                    - ExtremeSwitching
                            5420F-16W-32P-4XE—ExtremeXOS 31.3 and
                        later.
 
                    - ExtremeSwitching
                            5420F-48P-4XE—ExtremeXOS 31.3 and
                        later.
 
                    - ExtremeSwitching
                            5420F-48P-4XL—ExtremeXOS 31.3 and
                        later.
 
                    - ExtremeSwitching
                            5420M-16MW-32P-4YE—ExtremeXOS 31.3 and
                        later.
 
                    - ExtremeSwitching
                            5320-48P-8XE—ExtremeXOS 31.6 and
                        later.
 
                    - ExtremeSwitching
                            5320-24P-8XE—ExtremeXOS 31.6 and
                        later.
 
                    - ExtremeSwitching
                            5320-16P-4XE—ExtremeXOS 31.7 and
                        later.
 
                    - ExtremeSwitching
                            5320-16P-4XE-DC—ExtremeXOS 31.7 and
                        later.
 
                
        
        PoE++
            
            
                - ExtremeSwitching 5520-24W—ExtremeXOS 31.1 and later.
 
                - ExtremeSwitching 5520-48W—ExtremeXOS 31.1 and later.
 
                - ExtremeSwitching 5520-12MW-36W—ExtremeXOS 31.1 and later.
 
                - ExtremeSwitching 5420F-8W-16P-4XE—ExtremeXOS 31.3 and later.
 
                - ExtremeSwitching 5420F-16MW-32P-4XE—ExtremeXOS 31.3 and later.
 
                - ExtremeSwitching 5420F-16W-32P-4XE—ExtremeXOS 31.3 and later.
 
                - ExtremeSwitching 5420M-24W-4YE—ExtremeXOS 31.3 and later.
 
                - ExtremeSwitching 5420M-16MW-32P-4YE—ExtremeXOS 31.3 and later.
 
                - ExtremeSwitching 5420M-48W-4YE—ExtremeXOS 31.3 and later.
 
                - ExtremeSwitching 5720-24MW—Switch Engine 32.1 and later.
 
                - ExtremeSwitching 5720-24MXW—Switch Engine 32.1 and later.
 
                - ExtremeSwitching 5720-48MW—Switch Engine 32.1 and later.
 
                - ExtremeSwitching 5720-48MXW—Switch Engine 32.1 and later.